Outline Of Product - Mitsubishi A953GOT-SBD-M3-H Hardware Manual

A953 HANDY GOT
1. Introduction
This section describes the product configuration and the system configuration of the A95
handy graphic operation terminal (abbreviated as "Handy GOT" in the text).
1.1

Outline of product

The Handy GOT is used as an operation terminal connected to a controller such as the
MELSEC FX/QnA/Q Series PLC and a PLC manufactured by another company.
The Handy GOT is an all-in-one type graphic operation terminal equipped with a display unit
with touch switches and mechanical keys (operation switches) available to input commands to
the machine.
E m e r g e n c y s t o p s w i t c h
D i s p l a y u n i t
P O W E R
O p e r a t i o n
s w i t c h e s
Operation switches:
They are mechanical keys directly connected to inputs of the PLC.
Because they give commands directly to inputs of the PLC, they can be used for inputs
requiring immediate responses to the machine such as inputs for operation and stop.
These switches are offered for the operator who gives operation commands to the machine.
• Start/stop
• Preparation for operation
• Setup change
• Error reset
• Mode selection between automatic and individual
* You can arbitrarily change the name of these operation switches using a transparent sheet
and a mount sheet offered as accessories.
G R I P S W
C o n n e c t i o n c a b l e
( o p t i o n )
Use example:
Introduction 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
1-1