Cables - Mitsubishi GOT1000 GT15 User Manual

5.3.6

Cables

(1) Cables used
(a) For the MELSECNET/H connection (coaxial cable), MELSECNET/10 connection (coaxial
cable), and video connection, use double shield coaxial cables.
The 5C-2V connector plug is applicable to double-shielded coaxial cable.
Connect the 5C-2V connector plug to the coaxial cable inside a double-shielded coaxial cable.
Ground the shielded part outside a double-shielded coaxial cable as shown in the following
figure.
(b) For the CC-Link IE Field Network connection, use the following cable dedicated to the CC-Link
IE Field Network.
Mitsubishi Electric System & Service Co., Ltd.
(c) For details of the cables used for conncetions other than the above, refer to the following
manual.
(2) Adjusting a cable for the EMC Directive compliance
Modify the cables (including user-produced cable) to ensure compliance with the EMC Directive.
For details, refer to Section 5.4.2.
5
5.3 EMC Directive-Compliant System Configuration
- 14
5.3.6 Cables
Double-shielded coaxial cable
Mitsubishi Cable ... 5C-2V-CCY
Grounding
Manufacturer
•GOT1000 Series Connection Manual for GT Works3 and a controller used
•GOT1000 Series Connection Manual for GT Designer2/GT Works2
Enlarged view
of cable
Internal
conducter
Insulation External
material conductor
Model name
SC-E5EW-S M
Sheath
Sheath
External
conductor
(Grounding)