OUTPut:TTL[1|2]:STATe <Boolean>
This command is used to enable and disable the the rear panel Upper and
Lower window TTL Outputs. When enabled, the TTL Outputs can be used
to determine when a predefined limit is exceeded.
Syntax
Example
Reset Condition
On reset, the TTL outputs are disabled.
Query
OUTPut:TTL[1|2]:STATe?
The query command enters a 1 or 0 into the output buffer indicating
whether or not the TTL output is enabled..
Query Example
HP E4418B/E4419B Programming Guide
OUTP
:TTL
OUTP:TTL1:STAT 1
•
1 is returned when the TTL output is enabled.
•
0 is returned when the TTL output is disabled..
OUTP:TTL1:STAT?
OUTPut:TTL[1|2]:STATe <Boolean>
Space
1
:STAT
2
?
This command enables the rear
panel upper window TTL output.
This command queries whether or
not the upper window TTL output
is enabled.
OUTput Subsystem
0|OFF
1|ON
8-7