System:communicate:serial:transmit:sbits <Numeric_Value - HP E4418B Programming Manual

SYSTem Subsystem
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
SYSTem:COMMunicate:SERial:TRANsmit:SBITs <numeric_value>
This command sets the number of stop bits expected by the receiver on
received data and the number of stop bits included by the transmitter in
transmitted data.
Syntax
SYST
Parameters
Example
Reset Condition
On reset, the number of stop bits is unaffected.
Query
SYSTem:COMMunicate:SERial:TRANsmit:SBITs?
The query returns the current setting of the transmit/receive stop bits.
11-24
:COMM :SER
Item Description/Default
numeric_value A numeric value for the number of stop
bits.
SYST:COMM:SER:TRAN:SBIT 2
Space
:TRAN :SBIT
This command sets the number of
stop bits for the transmitter and
receiver to 2.
HP E4418B/E4419B Programming Guide
numeric_value
?
Range of
Values
1 or 2