MEMory:CLEar:TABLe
This command is used to clear the contents of the table currently selected
using MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as there
are no contents in the table.
This command is an alternative form of the MEMory:CLEar[:NAME]
command, the only difference being the method in which the table is
selected.
Note
Syntax
Example
Error Message
If no table is selected, error -221, "Settings conflict" occurs.
HP E4418B/E4419B Programming Guide
The contents cleared using this command are non-recoverable.
MEM
:CLE
MEM:CLE:TABL
:TABL
This command clears the contents
of the currently selected table.
MEMory Subsystem
MEMory:CLEar:TABLe
7-11