Format[:Readings]:Border Normal|Swapped - HP E4418B Programming Manual

FORMat[:READings]:BORDer NORMal|SWAPped

This command is used to control whether the binary data is transferred in
normal or swapped Byte ORDer. It is only used when
FORMat[:READings][:DATA] is set to REAL.
Syntax
Example
Reset Condition
On reset, this value is set to NORMal.
Query
FORMat[:READings]:BORDer?
The query returns the current setting of the byte order. The format of the
response is <character_data>.
Query Example
HP E4418B/E4419B Programming Guide
:READ
FORM
FORM:BORD SWAP
FORM:BORD?
FORMat[:READings]:BORDer NORMal|SWAPped
Space
:BORD
This command sets the byte order
to swapped.
This command queries the
current byte order setting.
FORMat Subsystem
NORM
SWAP
?
6-3