Memory:clear[:Name] <String - HP E4418B Programming Manual

MEMory Subsystem
MEMory:CLEar[:NAME] <string>
MEMory:CLEar[:NAME] <string>
This command is used to clear the contents of a given sensor calibration
table, frequency dependent offset table, or save/recall register.
Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as there
are no contents in the table.
For sensor calibration tables and frequency dependent offset tables, this
command is an alternative form of the MEMory:CLEar:TABLE command,
the only difference being the method in which the table is selected.
Note
Syntax
Parameters
Example
Error Messages
If the table or save/recall register name does not exist, error -224, "Illegal
parameter value" occurs.
7-10
The contents cleared using this command are non-recoverable.
:CLE
MEM
Item Description/Default
string
String data
MEM:CLE "HP8485A"
Space
:NAME
.
This command clears the contents
of sensor calibration table
HP 8485A
HP E4418B/E4419B Programming Guide
string
Range of Values
Any existing table
name or
save/recall register.