Status:operation:sense[:Summary] - HP E4418B Programming Manual

STATus:OPERation:SENSe[:SUMMary]

The operation status sense summary register set contains information on
the status of the power sensors.
The following bits in these registers are used by the power meter:
These bits are set when the power meter is reading data from the
HP E-series power sensor EEPROM.
These bits are cleared when the power meter is not reading data from the
HP E-series power sensor EEPROM.
Syntax
HP E4418B/E4419B Programming Guide
Bit Decimal
Definition
Number Weight
0 - Not used
1 2 Channel A SENSe Status
2 4 Channel B SENSe Status (HP E4419B only)
3-15 - Not used
STAT :OPER
STATus:OPERation:SENSe[:SUMMary]
:SENS :SUMM
STATus Subsystem
10-15