Memory:catalog:state - HP E4418B Programming Manual

MEMory Subsystem

MEMory:CATalog:STATe?

MEMory:CATalog:STATe?
This command is used to list the save/recall registers.
The power meter returns the data in the form of two numeric parameters
and as many strings as there are save/recall registers.
<numeric_value>,<numeric_value>{,<string>}
For example, a sample of a response may look like:
0,16190,"State0,STAT,0","State1,STAT,0" .........
Syntax
Example
7-6
• The first numeric parameter indicates the amount of memory, in
bytes, used for the storage of registers.
• The second parameter indicates the memory, in bytes, available
for the storage of registers.
• Each string parameter returned indicates the name, type and size
of a save/recall register:
<string>,<type>,<size>
<string> indicates the name of the save/recall register.
<type> indicates STAT for save/recall register.
<size> indicates the size of the save/recall register in bytes.
MEM :CAT
MEM:CAT:STAT?
:STAT ?
This command queries the list of
save/recall registers.
HP E4418B/E4419B Programming Guide