The Calculate[1|2]:Relative Node - HP E4418B Programming Manual

CALCulate Subsystem

The CALCulate[1|2]:RELative Node

The CALCulate[1|2]:RELative Node
This node contains commands which allow you to compare the
measurement signal to a reference value.
Within the CALCulate block the relative value is applied to the
measurement signal after any math calculations and display offsets have
been applied.
The commands associated with this node are:
CALCulate[1|2]:RELative[:MAGNitude]:AUTO <Boolean>|ONCE
CALCulate[1|2]:RELative:STATe <Boolean>
HP E4418B/E4419B Programming Guide 3-25