GE XGS868 Programming Manual page 60

November 2004
Selecting the Start Date
Selecting the End Time
3-4
1. Use the pull-down menu to select the desired start date for the log
and press Next Item/Enter.
2. If you selected:
OK or TODAY and the log is
•
•
non-circular, proceed to Selecting the End Time below.
•
circular, proceed to Selecting the Duration on the next page.
EDIT, proceed to the next step.
•
3. Enter the desired year (0-99) and press Next Item/Enter.
4. Use the pull-down menu to select the desired month and press
Next Item/Enter.
5. Enter the desired day (1 to the number of days in the selected
month) and press Next Item/Enter.
6. Do one of the following:
•
If you are creating a non-circular log, proceed to Selecting the
End Time below.
•
If you are creating a circular log, proceed to Selecting the
Duration on the next page.
1. Use the pull-down menu to select the desired start time for the log
and press Next Item/Enter.
2. If you selected:
OK, proceed to Selecting the End Date below.
•
EDIT, proceed to the next step.
•
TIMED, use the pull-down menu to select how long you want
•
the log to run and press Next Item/Enter. Then, proceed to
Selecting the Time Increment on the next page.
3. Use the pull-down menu to select AM or PM. Then, enter the
desired hour (1-12) and press Next Item/Enter.
Note: If you enter a start time earlier that the current time and error
will occur.
4. Enter the desired minutes (0 to 59) and press Next Item/Enter.
5. Enter the desired seconds (0 to 59) and press Next Item/Enter.
Logging Data