GE XGS868 Programming Manual page 111

November 2004
Adding an IDM-
Compatible Meter (cont.)
D-6
IMPORTANT:
The Network ID number must match the Network ID
programmed in the meter's Communications menu.
If the initialization is successful, the Meter Browser shows a listing
similar to Figure D-6 below.
Figure D-6: The Updated Network Tree
However, if the settings do not match, or there is some other
difficulty, a screen appears similar to Figure D-7 below.
Figure D-7: Communication Error Screen
The screen offers the options of trying again or of canceling the
operation. Click on the desired choice, and then on
[Exit Application]
choice or on
PanaView™ for IDM-Compatible Meters (916-086B)
[OK]
to close PanaView™.
to confirm the