GE XGS868 Programming Manual page 118

Saving a New Site to the
Meter
Saving a Site to the PC
PanaView™ for IDM-Compatible Meters (916-086B)
To save a new site to the meter:
1. Select the radio button for New and click on the Save Site to Meter
button.
2. A window opens similar to Figure D-16 below. Enter the desired
name, and click [OK].
Figure D-16: Site Name Entry Window
3. The Site File Selection window (Figure D-15 on page D-12)
opens. Highlight a site with the desired settings, and click
PanaView™ saves the site in the meter with the new name and the
desired settings.
To save a site to the PC:
1. Highlight the desired site in the left pane. (See Figure D-14 on
page D-12.)
2. Click Save Site to PC. A window opens similar to Figure D-13 on
page D-11.
3. Enter the desired site name and click
site in the PanaView™ folder unless otherwise specified.
Note: If you have created a site on the meter after opening the Site
File Operations window, you must close and reopen the
window to click on the new site.
November 2004
[Open].
[Save]
. PanaView™ saves the
D-13