Operation; Starting The Bookeye Color - Image Access BOOKEYE Color Operation Manual

6 Operation

6.1

Starting the BOOKEYE Color

Press the START button.
After the BOOKEYE Color is turned on, the lamps light up and the internal self test
sequence starts.
While the self test sequence runs, the display shows alternating in two lines:
After finishing the self test sequence and during the warm-up time of the lamps, the
display shows:
At the end of the lamp warm-up time the display changes to the message:
The BOOKEYE Color is now ready to use. On the keyboard, the following LEDs are
illuminated:
Page 18
System Test
Please wait !!
Warm up
System test ok
Device version (e.g. BE2-SCL-N2)
System test ok
Function field
FORMAT
TYPE
PAGES
COLOR
BRIGHTNESS
CONTRAST
COPIES
LED
A3
FLAT
LEFT
COLOR
AUTO
AUTO
1
Operation Manual