Scan2Net Firmware Update Procedure - Image Access BOOKEYE Color Operation Manual

11 Scan2Net Firmware Update Procedure

11.1 Basic requirements
A basic requirement for a successful firmware update is to configure the browser as
follows:
•
Set your browser to direct access to internet
or if you are connected via a proxy:
•
Enter the scanner's IP address in the exception list.
Additionally it is necessary to force the browser to reload the page content every time
directly from the scanner and not to load from the cache memory.
Refer to chapter 12.1 for the settings in Netscape Navigator.
Refer to chapter 12.2 for the settings in MS Internet Explorer.
Page 60 Operation Manual