Switching Off The Bookeye Color; Special Case: Switching Off By Stop Key Not Possible - Image Access BOOKEYE Color Operation Manual

Hide thumbs Also See for BOOKEYE Color:

Table of Contents

6.2

Switching off the BOOKEYE Color

Press and hold the STOP button for at least three seconds.

The red STOP LED starts blinking.

The lamps and all LEDs on the keyboard will be switched off.

During the shutdown sequence the display shows

At the end of the shutdown sequence only the green LED above the START button

remains on.

The BOOKEYE Color is now in stand-by mode.

6.2.1

If the BOOKEYE Color cannot be switched off due to a system disturbance, the device

can be powered down with the main switch.

Notice:

After switching off using the main switch, more time is necessary for the

subsequent system start since all system parameters have to be restored.

If the BOOKEYE Color is installed in a network with a high number of users, it might react

with a delay on commands from the user interface.

Operation Manual

System Shutdown

*******************

Page 19

Table of Contents

Do you have a question about the BOOKEYE Color and is the answer not in the manual?