Configuring Raid - Oracle Server X5-2 Installation Manual

5. Select your preferred boot mode, and then press Enter.
6. To save changes and exit BIOS, press the F10 key.
Note -
operating system installation.

Configuring RAID

If you want to configure the server storage drives in a RAID configuration, configure RAID on
your server before you install the Windows OS. For instructions for configuring RAID, refer to
"RAID Configuration Requirements" in Oracle Server X5-2 Installation
Related Information
Oracle X5 Series Servers Administration Guide at:
■
x86AdminDiag/docs
You must select the desired boot mode, Legacy BIOS or UEFI, before starting the
http://www.oracle.com/goto/
Preparing to Install the Windows Server Operating System
Configuring RAID
Guide.
31