I
P
O
& C
NITIAL
OWER
N
HECKOUT
4.3.1 Data Organization
During normal operation, the main screen of the Indoor SSPA displays the status, control mode,
state of operation (either transmit or standby), any fault or alarm conditions, RF output level,
power mode, and ten-meter readings or trip points. Figure 4-1 shows the typical main screen.
4.3.2
Navigation
The navigation requires the use of combinations of the following:
•
Menu key
•
Set Pwr key
•
Arrow keys
•
Enter key
4.3.2.1
Menu Key
Data is organized into categories in the menu screen. To get to the menu screen press the
MENU key located on the front panel. The menu screen contains EVENT LOG, SETUP,
CALIBRATION, TRIP POINTS, SCREEN CFG, VERSION, TIME, and SETUP. The SWITCH
CTRL menu is only present if a redundant switch system is selected. Press the MENU key while
in the menu screen to return to the main screen. Figure 4-2 shows the menu screen.
4-4
Figure 4-1. Typical Main Screen
Figure 4-2. Menu Screen
D
.01040053 R
.6
OC
EV