Automatic Power Compensation; Variable Gain Attenuation; Variable Or Automatic Fan Speed; Transportable Memory - CPI S5CIA Installation And Operation Manual

1.3.15

Automatic Power Compensation

The amplifier can be set to achieve a constant output power using the variable gain attenuator
automatically. The attenuator will compensate for input drive level changes as well as
temperature changes.
1.3.16

Variable Gain Attenuation

The SSPA overall gain can be adjusted up to 23dB in 0.1dB steps.
1.3.17

Variable or Automatic Fan Speed

Fan speed can be adjusted manually or automatically as required by the operator. The fans will
automatically operate at full power if there is any over temperature alarm.
1.3.18

Transportable Memory

The SSPA has built in transportable memory that holds serial numbers and calibration data.

1.4 Options

Optional equipment aids in the amplifiers performance, user friendliness, and reliability.
Options include the following:
• Remote control panel
•
Block-up converter (BUC)
•
BUC bypass
•
Redundant power supplies
• Transient surge suppression
• Ethernet LAN interface
•
Redundant or phase combined switch system
•
Input and output sample ports
• Exhaust duct
D .01040043 R .6
OC EV
I
NTRODUCTION
1-7