Operator's Preventative Maintenance - CPI S5CIA Installation And Operation Manual

Table 6-3. Recommended Test Equipment
Item Description
1(1) Swept Signal generator, capable of CW and
swept operation, compatible with Scalar
Analyzer, item 2.
2(1) Scalar Network Analyzer, complete with dual
detector probes. Should have dual markers, with
delete mode. Compatible with Swept Signal
Generator, item 1.
3(1) Vector Network Analyzer
4(2) Microwave Frequency Counter
5 RF Splitter, precision 2 way, 50 Ohms, Type N,
DC to 18 GHz
6 RF Power Meter complete with power sensors,
Type N, 50 Ohms, power measurement range
-30 to +20 dBM
7 Variable Attenuator, 0 to 25 dB, DC to 18 GHz,
50 Ohms
8 High quality, low loss RF test cables as required
for test set up
9 RF Radiation Detector
10 Calibrated Waveguide Directional Coupler
11 Dummy Load, 1 kW
Table 6-3 Notes:
1.
Items 1 and 2 are replaceable by item 3.
2.
Item 3 is replaceable by items 1 and 2.
3.
Item 4 is required only if item 1 is not digitally controlled or phase locked.

6.3 Operator's Preventative Maintenance

WARNING!
HAZARD
REPLACE, OR PLUG IN PARTS.
D .01040087 R .6
OC EV
OPERATORS SHOULD NOT REMOVE COVERS WITH ELECTRICAL
INDICATORS. ONLY
Example
(Equivalent may be substituted)
HP 8360, 8350
HP 8757
HP 8720D
HP5340A
HP 11667A
HP 437B, 438A meter
HP 8481 sensor
Merrimac ASM 25-11K
Narda 8718 meter with 8621 probe
Narda, HP, etc.
Waveline, Narda, etc.
SERVICE TECHNICIANS
M
AINTENANCE
SHOULD REPAIR,
6-5