Connecting To The Amplifier; Navigation; Amp Status Screen - CPI S5CIA Installation And Operation Manual

O
PERATION
5.4.2

Connecting to the Amplifier

Use the following steps to initiate communication between the amplifier and PC:
1. Open a web browser on the PC.
2. In the address field of the PC type in the amplifiers IP address.
3. A login screen will appear. The default user name is CPI and the password is CPI.
The amp status screen will appear.
5.4.3

Navigation

The left side lists all the operator accessible screens. The first screen an operator will encounter
is the amp status screen. To navigate through screens simply click on the name of the screen to
be viewed. The screens are explained in the sections that follow.
5.4.4

Amp Status Screen

Figure 5-20 is a typical amp status screen. The amp status screen displays monitored
parameters, the control type, the amplifier state, RF output, and power mode. When in this
screen the operator can place the amplifier in transmit, standby, and RF inhibit. The operator
must be in this screen to reset faults. Automatic level control (ALC), or manual can be selected
as well.
5-16
Figure 5-20. Amp Status
D .01040086 R .7
OC EV