Table of Contents
Advertisement
CHPA S
ERIES
5.14
Terminology
Various CHPA features, settings, and controls are grouped according to the following
hierarchy:
Category—Top-level group
Function—Data entry or data display selection within a category
Entry—Data entry or data review within a function
Access to the hierarchy is as follows:
Category—Press the MENU button to toggle through the accessible categories. Category names
appear on Line 3.
Function—When the t symbol appears next to a category, press the FUNCTION button to
toggle through the accessible functions (viewed on Line 4) under that category.
Entry—When the symbols appear next to a function, press either the up or down arrow
keys to toggle through valid entries.
Category—Computer Interface Parameters
Function—Baud Rate (Pressing the FUNCTION button would toggle through other
available entries such as Parity, Print ASCII, and so on.)
Entry—9600 (Pressing either arrow key will cycle through the other potential entries:
4800, 2400, 1200, 600, 300.)
5.15
Exiting a Menu
The user may return from any category to the selected meter display by pressing the buttons on
either Line 3 or Line 4.
5.16
Data Entry Rules
Numerical data will not take effect until the user has pressed the ENTER button. Arrow key
data entry will update when the arrow keys are pressed. The Quick Access Codes are the only
exceptions to these rules.
Numerical entries will indicate their present value until the user enters a new value.
Starting from the meter display on Lines 3 and 4, categories are accessible in the order specified
in Table 5-1, starting with RF Control. Press the MENU button to scroll through the available
categories. While in any menu category, press either the Line 3 or Line 4 buttons to return to the
selected meter displays. Appendix B describes each category in detail.
5-10
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
D
.01023245 R
.R
OC
EV
Advertisement
Table of Contents
