Led Indicators; Main Menu Display Screens - CPI S5CIA Installation And Operation Manual

O
PERATION
The user will have to answer the prompt correctly to shutdown the amplifier. No response will
cause the amplifier to return to its state preceding the button push. If the amplifier was off-line
when the power button is pushed, it will immediately shutdown. The amplifier can be forced
off even while transmitting, by pushing the button and holding for 5 seconds.
5.3.2

LED Indicators

Current operating status is available by observing the front panel LEDs located under the
TRANSMIT, STANDBY, and RESET keys. Refer to Table 5-2 for front panel LED functionality.
Table 5-2. IDU Front Panel LED Functionality
Indicator
TRANSMIT
STANDBY
REMOTE
ONLINE
FAULT
5.3.3

Main Menu Display Screens

The graphical display is located on the front panel and includes the main screen, RF metering,
power supply unit (PSU) display, and fan speed display. Use the
browse between them.
The main screen in shows up to 10 fields of the users choice. The top of the main menu displays
the power mode, control mode, RF output, and status. Figure 5-2 is a screen shot of a main
menu.
5-6
Color Description
Green -On when the amplifier is in transmit mode
-Off when the amplifier is in standby mode
-Flashes when the amplifier has faulted
Yellow -On when the amplifier is in standby mode
-Off when the amplifier is in transmit mode
Yellow -On when amplifier is in remote mode
-Off when amplifier is in local mode
Yellow -On if the amplifier is the on-line amplifier
when used with a redundant switch system
Red -Flashes when the amplifier has faulted
Figure 5-2. Main menu screen
and arrow keys to
LEFT RIGHT
D .01040086 R
OC
.7
EV