Amplifier Setup - CPI S5CIA Installation And Operation Manual

8.3.2

Amplifier Setup

1. Bring both PA1 and PA2 to normal operation with no faults, and alarms.
2. From the amplifier's main menu depress the "Menu" keypad so that the front panel screen
shows nine menus.
3. Use the Arrow keypads to stroll the highlighted "Setup" field.
4. Press the Enter keypad and use the arrow keypad to select the switch system set up menu
(5/5).
5. From this menu use the up/down keypad to scroll through the different parameters and
use the left/right keypad to change the content of the parameter (line item) as shown in
table 8-1.
Table 8-1. Switch Parameters and Settings
Parameter
Switch System
Amp ID
Priority
Switch Mode
Power Copy
Sequential Drive
D .01040019 R .3
OC EV
Setting
1:1 or 1:2 as required.
1 or 2 or 3 (Note the top amplifier is set 1 and sequentially
down)
(The default is 1 in the 1:1 system)
(Optional for a 1:2 system)
MAN (Manual or Auto, it can be changed anytime from the
switch control screen).
YES is default (Yes or No selectable)
NO is set (Yes or No selectable)
R S O
EDUNDANT WITCH PTION
8-3