Ethernet Interface Connector (J14) (Optional) - CPI S5CIA Installation And Operation Manual

E I
XTERNAL NTERFACES
The unit is shipped from the factory with the default relay settings provided in Table 3-4.
Table 3-4. Discrete Output Factory Settings
Relay
1
2
3
4
3.1.5 Ethernet Interface Connector (J14)
(Optional)
This port is a standard RJ-45, 10BaseT Ethernet LAN connection. The operator can control and
monitor the SSPA using a Java enabled interface on a PC browser.
Even if the optional LAN connectivity was not included, the LAN port can still be used to
obtain important diagnostic and fault information for/by CPI service personnel.
3-6
Monitored Parameters
Summary Fault
Summary Warning
High Reflected RF Power Fault
Low RF Output Power Fault
D .01040045 R .6
OC EV