Exiting A Menu; Data Entry Rules; Table 5-1. Front Panel Categories - CPI Satcom Division VZU-6997 Series Installation, Operation And Maintenance Manual

5.15 Exiting A Menu

The user may return from any category to the selected meter display by pressing the buttons on
either Line 3 or Line 4.

5.16 Data Entry Rules

Numerical data will not take effect until the user has pressed the ENTER button. Arrow key
data entry will update when the arrow keys are pressed. The Quick Access Codes are the only
exceptions to these rules.
Numerical entries will indicate their present value until the user enters a new value.
Starting from the meter display on Lines 3 and 4, categories are accessible in the order specified
in Table 5-1, starting with RF Control. Press the MENU button to scroll through the available
categories. While in any menu category, press either the Line 3 or Line 4 buttons to return to the
selected meter displays. Appendix B describes each category in detail.

Table 5-1. Front Panel Categories

Category Name
RF Control
Linearizer Control (optional)
RF Trip Limits/Switch Port Relay Settings
Fault Log
Factory Authorized Access Code
D .01023245 R .L
OC EV
THIS DOCUMENT IS THE PROPERTY OF COMMUNICATIONS & POWER INDUSTRIES.
REPRODUCTION OR RELEASE WITHOUT EXPRESS PERMISSION IS STRICTLY PROHIBITED
Purpose
RF Output Setting
Attenuator Setting
RF Power Mode
RF Inhibit
RF Display (W, dBW, dBm)
Suppress Peak Mode (disables RF peak mode
metering)
Gain
Phase
Amplitude
High RF Alarm
High RF Fault
Low RF Alarm
Low RF Fault
High Reflected RF Fault
Low RF Relay Preference
Fault Relay Preference
CHPA SERIES
5-11