GRAPHTEC gl820 User Manual page 83

(10) Data replay menu
Data replay menus are displayed by pressing the MENU key during replay.
Cursor Move to First Data
Position
Move to Last Data
Move to Center
Move to
Selected Posi-
tion
Cursor Synch
Data search CH
Mode
Level
Find Next
Find Previous
Statistical Function
calculation Execute
between
cursors
(10)-1 Move to First Data
Executing this option moves the currently selected cursor (A or B) to the start of the data.
(10)-2 Move to Last Data
Executing this option moves the currently selected cursor (A or B) to the end of the data.
(10)-3 Move to Center
Executing this option moves the currently selected cursor (A or B) to the center of the data.
Setting
Method:
[Position] Position
[Time] Date
Time
[CH1 to CH200]
[Logic]
[Pulse]
[Alarm]
[CH1 to CH200]
[Logic]
[Pulse]
[Alarm]
[CH1 to CH200]
CHAPTER 3 Settings and Measurement
Selections available
Press right key to execute.
Press right key to execute.
Press right key to execute.
Position, Time
0 to end of data
For example, if the sampling interval is 100 ms, capture desti-
nation is the built-in RAM, and the number of capture points
is 10000, settings up to 9999 ms are available.
Date from the start to end of the data
Time from the start to end of the data
Off, On
CH1 to 200, Logic, Pulse, Alarm
* Logic and Pulse are displayed only if the Logic Pulse func-
tion is On in the AMP settings.
CH1-200
Logic1-4
Pulse1-4
Alarm1-4
↑H, ↓L
↑H, ↓L
↑H, ↓L
Both, ↑H, ↓L
Set numeric value
Set numeric value
Press right key to execute.
Press right key to execute.
Off, Average, Max, Min, Peak, RMS
Press right key to execute.
3−47