GRAPHTEC gl820 User Manual page 71

(5) Interface settings
This menu is used to specify conditions for PC connection.
Setting
Selections availableNew Line code
USB USB ID
settings
TCP-IP Auto IP Address Acquisition
setting
IP Address
Subnet Mask
Port Number
Gateway
DNS Address
Keep Alive
FTP server
settings
Host Name
Reflect Settings
(5)-1 New Line code
Specifies the line feed code.
Selection item
CR+LF
LF
CR
(5)-2 USB settings
Sets the USB ID number of GL820.
Specify a number from 0 to 9 (default value: 0).
To control more than one GL820 unit with one PC, assign a unique USB ID to each of them.
FTP Server
User Name
Password
Port Number
PASV Mode
FTP Server Connec-
tion Test
Description
Starts a new line with CR+LF code (default value).
Starts a new line with LF code.
Starts a new line with CR code.
CHAPTER 3 Settings and Measurement
Selections available
CR+LF, LF, CR
0 to 9
On, Off
0-255.0-255.0-255.0-255 (only if Auto IP Address Acquisi-
tion is Off)
0-255.0-255.0-255.0-255 (only if Auto IP Address Acquisi-
tion is Off)
1024~65535
0-255.0-255.0-255.0-255 (only if Auto IP Address Acquisi-
tion is Off)
0-255.0-255.0-255.0-255 (only if Auto IP Address Acquisi-
tion is Off)
Off; 10, 30 seconds; 1, 10, 30 minutes; 1 hour
Text input
Text input
Text input
0~65535
Off, On
Press right key to execute.
Text input
Press right key to execute.
3−35