GRAPHTEC gl820 User Manual page 79

(7)-4 Specify Save Destination (Screen Copy)
Saves data being replayed as an image file to the internal memory or USB memory.
<If the naming method is Auto>
Setting
(1) Folder
(2) File
(3) Name Type
(4) File Type
(7)-5 Execute (Screen Copy)
Executes screen copy and saves it to an image file. * Refer to page (7)-4 "Specify Save Destination" for
details on specifying the save destination.
(7)-6 Save
Saves the setting conditions of the GL820.
<If the naming method is Auto>
Setting
(1) Folder
(2) File
(3) Name Type
(7)-7 Load
Loads and reflects the GL820 setting conditions from a file.
Setting
(1) File
Specify a folder to which you want to save data. Refer to page 3-44, "File box" for details.
Specify a file to which you want to save data. Refer to page 3-44, "File box" for details.
Set how a data file should be named.
Auto : Automatically supplies the file name.
Example: 20050101-123456_UG.BMP
Number part
UG
BMP
Arbitrary : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has been entered, followed by
a sequential number.
Sets the file format used to save data.
BMP: Saves data in bitmap file format
PNG: Saves data in ping format
Specify a folder to which you want to save data. Refer to page 3-44, "File box" for details.
Specify a file to which you want to save data. Refer to page 3-44, "File box" for details.
Set how a data file should be named.
Auto : Automatically supplies the file name.
Example: 20050101-123456_UG.CND
Number part
UG
CND
Arbitrary : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has been entered, followed by
a sequential number.
Specify a file to which you want to save data. Refer to page 3-44, "File box" for details.
CHAPTER 3 Settings and Measurement
<If the naming method is Arbitrary>
Description
: File creation date
* The file is created on January 1, 2005, 12:34:56 in this
example.
: User number of the user capturing data
UG: Guest
U1: User 1
U2: User 2
: Data format
BMP: Bitmap file format
PNG: Ping format
<If the naming method is Arbitrary>
Description
: File creation date
* The file is created on January 1, 2005, 12:34:56 in this
example.
: User number of the user capturing data
UG: Guest
U1: User 1
U2: User 2
: Data format
(GL820 setting file format)
Description
3−43