GRAPHTEC gl820 User Manual page 77

(7)-1 File Operation
Operate files in the main memory and USB device. For details on file operation, see on page 3-44.
(7)-2 Data Save
Saves data being replayed to the internal memory or USB memory.
<If the naming method is Auto>
Setting
(1) Folder
(2) File
(3) File Type
(4) Name Type
(5) Save Range
(7)-3 Remove/Exchange USB Memory
The GL820 allows you to exchange the USB memory while data is captured to it.
Exchange the USB memory in accordance with the following procedure:
(1) Press the FILE key to open the FILE menu.
Specify a folder to which you want to save data. Refer to page 3-44,
"File box" for details.
Specify a file to which you want to save data. Refer to page 3-44, "File
box" for details.
Sets the file format used to save data.
GBD: Creating a data file in Graphtec's proprietary binary format
* Data tampering can be prevented.
CSV: Creating a data file in text format
* Replaying on the GL820 is not available.
Set how a data file should be named.
Auto : Automatically supplies the file name.
Example: 20050101-123456_UG.GBD
Number part : File creation date
UG
GBD
Arbitrary : Data is captured to a file with an entered file name.
Sequential number : A file is created with an arbitrary file name that has
been entered, followed by a sequential number.
Sets the range of data to be saved.
All Data : Saves all data regardless of the cursors.
Data between Cursors : Saves only a range of data between cursors
A and B.
CHAPTER 3 Settings and Measurement
<If the naming method is Arbitrary>
Description
* The file is created on January 1,
2005, 12:34:56 in this example.
: User number of the user capturing data
UG: Guest
U1: User 1
U2: User 2
: Data format GBD
(Binary data)
CSV (Text format)
3−41