Read Cycle By Esp; Read Cycle By Serial Command - Microscan MS-3 User Manual

Read Cycle by ESP

Read Cycle by ESP

Click this Button to bring
up the Read Cycle
To open nested options,
single-click the +.
To change a setting,
double-click the set-
ting and use your
curser to scroll through
the options.

Read Cycle by Serial Command

Command Title
Number of Symbols
Time Between Identical Decodes <K503,TBID>
Trigger Mode
Serial Trigger Character
Start Character
Stop Character
No Decode Timeout
Decodes Before Timeout
Noread Message
Automatic Gain Control
Lighting Intensity
Filter Mode
3-2
MS-3 CCD Reader User's Manual
menu
<K222, number of symbols>
<K200,trigger mode>
<K201, serial trigger character>
<K229,start trigger character>
<K230, stop trigger character>
<K220, no decode timeout>
<K221, number before output>
< , ,noread message>
K714 status
<K522,shutter speed,minimum speed,maximum speed>
<K523,percent lighting>
<K524,filter mode,filter list>
Format