Configuring Multicast Source Port Filtering - HP 6125XLG Ip Multicast Configuration Manual

Blade switch
Table of Contents

Advertisement

You can configure a multicast filter either for the current port in interface view or globally for all
ports in IGMP-snooping view. If the configurations are made in both interface view and
IGMP-snooping view, the configuration made in interface view takes priority.
Configuring a multicast group filter globally
Step
1.
Enter system view.
Enter IGMP-snooping view.
2.
3.
Configure a multicast group
filter globally.
Configuring a multicast group filter on a port
Step
1.
Enter system view.
2.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
3.
Configure a multicast group
filter on a port.

Configuring multicast source port filtering

If the multicast source port filtering feature is enabled on a port, the port blocks all multicast data packets,
but it permits multicast protocol packets to pass. You can connect the port to only multicast receivers
rather than to multicast sources.
If this feature is disabled on a port, you can connect the port to either multicast sources or multicast
receivers.
You can enable multicast source port filtering either for the specified ports in IGMP-snooping view or for
the current port in interface view. These configurations have the same priority.
Configuring multicast source port filtering globally
Step
1.
Enter system view.
2.
Enter IGMP-snooping view.
3.
Enable multicast source port
filtering.
Configuring multicast source port filtering on a port
Step
1.
Enter system view.
Command
system-view
igmp-snooping
group-policy acl-number [ vlan
vlan-list ]
Command
system-view
interface interface-type
interface-number
igmp-snooping group-policy
acl-number [ vlan vlan-list ]
Command
system-view
igmp-snooping
source-deny port interface-list
Command
system-view
24
Remarks
N/A
N/A
By default, no multicast group filter
is configured. A host can join any
valid multicast group.
Remarks
N/A
N/A
By default, no multicast group filter
is configured on a port. Hosts on
this port can join any valid
multicast group.
Remarks
N/A
N/A
By default, multicast source port
filtering is disabled.
Remarks
N/A

Advertisement

Table of Contents
loading

Table of Contents