Bidir-Pim Configuration Example - HP 6125XLG Ip Multicast Configuration Manual

Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address
10.110.9.1
Scope: 239.0.0.0/8
Group/MaskLen: 239.0.0.0/8
RP address
10.110.5.2 (local)
# Display RP information on Switch F.
[SwitchF] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
RP address
10.110.9.1 (local)

BIDIR-PIM configuration example

Network requirements
As shown in
VOD streams are sent to receiver hosts in multicast.
•
Source 1 and Source 2 send multicast data to the multicast group 225.1.1.1.
•
• Host A and Host B are receivers of this multicast group.
IGMPv2 runs between Switch B and Host A and between Switch D and Host B.
•
Figure 48 Network diagram
Receiver 1
Host A
Source 1
Table 9 Interface and IP address assignment
Device
Switch A
Figure 48:
Switch B
Vlan-int200
Vlan-int101
Vlan-int101
Vlan-int100
Switch A
Interface
VLAN-interface 100
Priority HoldTime
192 150
Priority HoldTime
192 150
Priority HoldTime
192 150
Vlan-int102 Vlan-int102
Vlan-int103
BIDIR-PIM
Vlan-int103
129
Uptime Expires
00:03:42 00:01:48
Uptime Expires
00:06:54 00:02:41
Uptime Expires
00:00:32 00:01:58
Loop0
Switch C
Vlan-int400
Switch D
IP address
192.168.1.1/24
Receiver 2
Host B
Source 2