Configuring Ipv6 Multicast Forwarding Between Sub-Vlans Of A Super Vlan; Displaying And Maintaining Ipv6 Multicast Routing And Forwarding - HP 6125XLG Ip Multicast Configuration Manual

Step
1. Enter system view.
2. Enter Layer 2 Ethernet
interface/Layer 2 aggregate
interface view.
3. Configure a static multicast
MAC address entry.
Configuring IPv6 multicast forwarding between sub-VLANs of a
super VLAN
A super VLAN is associated with multiple sub-VLANs. Sub-VLANs are isolated with each other at Layer
2. For information about the super VLAN and sub-VLANs, see Layer 2—LAN Switching Configuration
Guide.
To configure multicast forwarding between sub-VLANs of a super VLAN:
Step
1. Enter system view.
2. Enter VLAN interface view.
3. Configure IPv6 multicast
forwarding between
sub-VLANs of a super VLAN.
4. Clear all IPv6 multicast
forwarding entries with super
VLAN interface as the
incoming interface.
Displaying and maintaining IPv6 multicast routing
and forwarding
CAUTION:
The reset commands might cause IPv6 multicast data transmission failures.
Execute display commands in any view and reset commands in user view.
Command
system-view
interface interface-type
interface-number
mac-address multicast
mac-address vlan vlan-id
Command
system-view
interface vlan-interface
interface-number
ipv6 multicast forwarding
supervlan community
reset ipv6 multicast [ vpn-instance
vpn-instance-name ]
forwarding-table
{ { ipv6-source-address
[ prefix-length ] |
ipv6-group-address [ prefix-length ]
| incoming-interface
{ interface-type interface-number } }
* | all }
258
Remarks
N/A
N/A
By default, no static multicast MAC
address entries exist.
Remarks
N/A
N/A
By default, IPv6 multicast data
cannot be forwarded between
sub-VLANs of a super VLAN.
N/A