HP 6125XLG Ip Multicast Configuration Manual page 170

Blade switch
Table of Contents

Advertisement

# Configure an MSDP peer on Loopback 0 of Switch B.
[SwitchB] msdp
[SwitchB-msdp] originating-rp loopback 0
[SwitchB-msdp] peer 2.2.2.2 connect-interface loopback 0
[SwitchB-msdp] quit
# Configure an MSDP peer on Loopback 0 of Switch D.
[SwitchD] msdp
[SwitchD-msdp] originating-rp loopback 0
[SwitchD-msdp] peer 1.1.1.1 connect-interface loopback 0
[SwitchD-msdp] quit
Verifying the configuration
# Display brief information about MSDP peers on Switch B.
[SwitchB] display msdp brief
Configured
1
Peer address
2.2.2.2
# Display brief information about MSDP peers on Switch D.
[SwitchD] display msdp brief
Configured
1
Peer address
1.1.1.1
# Send an IGMP report from Host A to join the multicast group 225.1.1.1. (Details not shown.)
# Send multicast data from Source 1 10.1 10.5.100/24 to the multicast group 225.1.1.1. (Details not
shown.)
# Display the PIM routing table on Switch D.
[SwitchD] display pim routing-table
No information is output on Switch D.
# Display the PIM routing table on Switch B.
[SwitchB] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Established
Listen
1
0
State
Up/Down time
Established 00:10:57
Established
Listen
1
0
State
Up/Down time
Established 00:10:57
Connect
Shutdown
0
0
AS
SA count
?
0
Connect
Shutdown
0
0
AS
SA count
?
0
160
Disabled
0
Reset count
0
Disabled
0
Reset count
0

Advertisement

Table of Contents
loading

Table of Contents