HP 6125XLG Ip Multicast Configuration Manual page 321

Figure 98 Network diagram
Table 18 Interface and IPv6 address assignment
Device
Switch A
Switch A
Switch B
Switch B
Switch C
Switch C
Switch D
Switch D
Switch D
Switch D
Configuration procedure
1. Assign an IPv6 address and prefix length to each interface according to
shown.)
2. Configure OSPFv3 on the switches in the IPv6 PIM-DM domain to meet the following requirements:
(Details not shown.)
The switches are interoperable at the network layer.
The switches can dynamically update their routing information.
3. Enable IPv6 multicast routing, MLD, and IPv6 PIM-DM:
Interface
VLAN-interface 100
VLAN-interface 103
VLAN-interface 200
VLAN-interface 101
VLAN-interface 200
VLAN-interface 102
VLAN-interface 300
VLAN-interface 103
VLAN-interface 101
VLAN-interface 102
311
IPv6 address
1001::1/64
1002::1/64
2001::1/64
2002::1/64
2001::2/64
3001::1/64
4001::1/64
1002::2/64
2002::2/64
3001::2/64
Figure 98. (Details not