Configuring A Port-Based Ipv6 Multicast Vlan; Configuration Prerequisites; Configuring User Port Attributes - HP 6125XLG Ip Multicast Configuration Manual

Step
1. Enter system view.
2. Configure a VLAN as an
IPv6 multicast VLAN and
enter its view.
3. Assign the specified VLANs
to the IPv6 multicast VLAN as
sub-VLANs.

Configuring a port-based IPv6 multicast VLAN

Before you assign the users ports that contain the receivers to the IPv6 multicast VLAN, you must first
configure the attributes for the user ports.
You can assign a port to an IPv6 multicast VLAN only when the port is an Ethernet port or a Layer 2
aggregate interface.

Configuration prerequisites

Before you configure a port-based IPv6 multicast VLAN, complete the following tasks:
• Create VLANs as required.
Enable MLD snooping for the VLAN to be configured as the IPv6 multicast VLAN.
•
Enable MLD snooping for all the VLANs that contain the receiver hosts.
•

Configuring user port attributes

Step
1. Enter system view.
2. Enter interface view.
3. Configure the link type of the
user port as hybrid.
4. Specify the PVID of the current
user port as the VLAN to
which the user port belongs.
5. Configure the current user port
to permit IPv6 multicast VLAN
and to untag the packets.
Command
system-view
ipv6 multicast-vlan vlan-id
subvlan vlan-list
Command
system-view
interface interface-type
interface-number
port link-type hybrid
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
untagged
244
Remarks
N/A
By default, a VLAN is not an IPv6 multicast
VLAN.
By default, an IPv6 multicast VLAN does
not have any sub-VLANs.
Remarks
N/A
N/A
The default setting is access.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.
By default, the PVID for a hybrid
port is VLAN 1.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.
By default, a hybrid port permits
only VLAN 1.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.