Assigning User Ports To An Ipv6 Multicast Vlan; Setting The Maximum Number Of Ipv6 Multicast Vlan Forwarding Entries - HP 6125XLG Ip Multicast Configuration Manual

Assigning user ports to an IPv6 multicast VLAN

To configure user ports for an IPv6 multicast VLAN, you must configure a VLAN as an IPv6 multicast
VLAN, and assign the desired user ports to the IPv6 multicast VLAN. You can either assign the user ports
to the IPv6 multicast VLAN in IPv6 multicast VLAN view, or assign the user ports to the IPv6 multicast
VLAN in interface view.
When you configure user ports for an IPv6 multicast VLAN, follow these guidelines:
The VLAN to be configured as an IPv6 multicast VLAN must exist.
•
• A port can belong to only one IPv6 multicast VLAN.
Assigning ports to an IPv6 multicast VLAN in IPv6 multicast VLAN view
Step
1. Enter system view.
2. Configure an IPv6 VLAN as
an IPv6 multicast VLAN and
enter its view.
3. Assign ports to the IPv6
multicast VLAN.
Assigning a port to an IPv6 multicast VLAN in interface view
Step
1. Enter system view.
2. Configure an IPv6 VLAN as
an IPv6 multicast VLAN and
enter its view.
3. Return to system view.
4. Enter interface view.
5. Assign the current port to the
IPv6 multicast VLAN.
Setting the maximum number of IPv6 multicast
VLAN forwarding entries
You can set the maximum number of IPv6 multicast VLAN forwarding entries on the device. When the
upper limit is reached, the device does not create IPv6 multicast VLAN forwarding entries until some
entries age out or are manually removed.
If the total number of the entries exceeds the upper limit value that you are setting, the system does not
automatically remove existing entries or create new entries. In this case, HP recommends that you remove
extra entries manually.
To set the maximum number of IPv6 multicast VLAN forwarding entries:
Command
system-view
ipv6 multicast-vlan vlan-id
port interface-list
Command
system-view
ipv6 multicast-vlan vlan-id
quit
interface interface-type interface-number
ipv6 port multicast-vlan vlan-id
245
Remarks
N/A
By default, a VLAN is not an IPv6
multicast VLAN.
By default, an IPv6 multicast VLAN does
not have any user ports.
Remarks
N/A
By default, a VLAN is not
an IPv6 multicast VLAN.
N/A
N/A
By default, a user port does
not belong to any IPv6
multicast VLAN.