Removing An Unlocked Front Bezel - HPE ProLiant MicroServer Gen10 User Manual

Hide thumbs Also See for ProLiant MicroServer Gen10:

Table of Contents

2. Open the front bezel.

3. To completely detach the bezel from the front panel, release the bezel hinges from the chassis.

Retain the bezel for later use.

Removing an unlocked front bezel

Prerequisites

1. Power down the server on page 22.

2. Disconnect the power cord from the AC source, and then from the server.

3. Disconnect all peripheral cables from the server.

Procedure

1. Open the front bezel.

2. To completely detach the bezel from the front panel, release the bezel hinges from the chassis.

Retain the bezel for later use.

Removing an unlocked front bezel

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the ProLiant MicroServer Gen10 and is the answer not in the manual?