Install The Trusted Platform Module Board - HPE ProLiant MicroServer Gen10 User Manual

5. Remove the system board assembly on page 28.
6. Install the Trusted Platform Module board on page 53.
7. Install the system board assembly on page 27.
8. Install the chassis cover on page 27.
9. Connect all peripheral cables to the server.
10. Connect the power cord to the server power jack, and then to the AC source.
11. Power up the server on page 22.

Install the Trusted Platform Module board

Procedure
1. Locate the TPM connector on the system board.
2. Install the TPM board.
3. Install the TPM security rivet by pressing the rivet firmly into the system board.
Install the Trusted Platform Module board 53