Secure Boot Configuration; Utilities And Features; Hpe Smart Storage Administrator; Marvell Storage Utility - HPE ProLiant MicroServer Gen10 User Manual

Secure Boot configuration

Secure Boot is implemented in the BIOS and does not require special hardware. Secure Boot ensures that
each component launched during the boot process is digitally signed. Secure Boot also ensures that the
signature is validated against a set of trusted certificates embedded in the UEFI BIOS.
Secure Boot validates the software identity of the following components in the boot process:
• UEFI drivers loaded from PCIe cards
• UEFI drivers loaded from mass storage devices
• Preboot UEFI shell applications
• OS UEFI boot loaders
When Secure Boot is enabled, only firmware components and operating systems with boot loaders that have
an appropriate digital signature can be executed during the boot process. Only operating systems that
support Secure Boot and have a UEFI boot loader signed with one of the authorized keys can boot.
User can customize the certificates embedded in the UEFI BIOS by adding or removing their own certificates.

Utilities and features

HPE Smart Storage Administrator

The HPE SSA is a configuration and management tool for HPE Smart HBA and Smart Array controller
options. The HPE SSA exists in the following interface formats:
• HPE SSA GUI
• HPE SSA CLI
• HPE SSA Scripting
Although all formats support configuration tasks, some of the advanced tasks are available in only one format.
In this server, HPE SSA can be accessed in both online and offline modes. In online mode, SSA is only
accessible from the local server.
To access, install, and launch HPE SSA in an online environment, download the HPE SSA executables from
the Hewlett Packard Enterprise Support Center website (http://www.hpe.com/support/hpesc). Under Select
your HPE product, enter the product name or number, and then click Go.
To access, install, and launch HPE SSA in an offline environment, download the HPE SSA ISO image from
the HPE Smart Storage Administrator website:
http://www.hpe.com/servers/ssa
For more information, see the HPE Smart Storage Administrator User Guide:
http://www.hpe.com/support/SSA_UG_en

Marvell Storage Utility

The Marvell Storage Utility is a browser-based configuration and management utility for the embedded
Marvell storage controller. Use this utility to create and manage RAID virtual disks and arrays using the drives
connected to the embedded storage controller.
For more information, see the Marvell Storage Utility User Manual for 88SE9230 and 88SE9220 included in
the SATA management tool package for the server. To download this package, go to the Hewlett Packard
Enterprise Support Center website (http://www.hpe.com/support/hpesc). Under Select your HPE product,
enter the product name or number, and then click Go.
Secure Boot configuration 63