Table of Contents
Advertisement
•
Remote deployment installation—Use Insight Control server provisioning for an automated solution
to remotely deploy an operating system.
For additional system software and firmware updates, download the Service Pack for ProLiant from the
Hewlett Packard Enterprise website (http://www.hpe.com/servers/spp/download). Software and
firmware should be updated before using the node for the first time, unless any installed software or
components require an older version.
For more information on using these installation methods, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/ilo).
Installing the system software
To access and configure Intelligent Provisioning on a single node:
Access Intelligent Provisioning by rebooting the server and pressing F10.
1.
The first time you log into Intelligent Provisioning, follow the steps to set preferences and activate
2.
Intelligent Provisioning.
From the Home screen, click Perform Maintenance, and then click Firmware Update.
3.
Ensure the latest drivers are available for installation. Select Intelligent Provisioning Software
4.
from the list of firmware, and click Update. If the check box is not selected, the latest drivers are
already installed.
Registering the server
To experience quicker service and more efficient support, register the product at the Hewlett Packard
Enterprise Product Registration website (http://www.hpe.com/info/register).
Setup 16
Advertisement
Table of Contents
