I/O Slot Card - HPE ProLiant XL740f Gen9 User And Maintenance Manual

Remove the front panel I/O board.
7.
To replace the component, reverse the removal procedure.

I/O slot card

To remove the component:
Power down the server (on page 10).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 11).
3.
Remove the access panel (on page 12).
4.
Disconnect the NIC-Y cable
5.
Remove the I/O slot card assembly.
6.
("NIC-Y connectors" on page 54).
Removal and replacement procedures 42