Component Identification; Front Panel Identification - HPE ProLiant XL740f Gen9 User And Maintenance Manual

Component identification

Front panel identification

Item Description
Serial label pull tab
1
SUV connector
2
Power On/Standby button and
3
system power LED
Health LED
4
iLO 4 link/activity LED
5
UID LED/button
6
NIC 2 status LED
7
NIC 1 status LED
8
Status
—
—
Solid green = System is on.
Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
Flashing amber (1Hz/cycle per sec) = Power or critical fault
Amber = System is in standby.
Off = No power present
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is rebooting.
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System is critical.
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid blue = Activated
Flashing blue:
•
1 Hz/cycle per sec = Remote management or firmware
upgrade is in progress.
•
4 Hz/cycle per sec = iLO manual soft reboot sequence
initiated
•
8 Hz/cycle per sec = iLO manual hard reboot sequence is in
progress.
Off = Deactivated
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Component identification 6