How To Charge - AnyTone D868UV Instruction Manual

Hide thumbs Also See for D868UV:
Table of Contents

Advertisement

5. Do not recharge the battery pack if it is already fully charged. This may shorten the life of the
battery pack or damage the battery pack.
6. Do not charge the battery or the radio if it is damp. Dry it before charging to avoid danger.
WARNING: When keys, ornamental chain or other electric metals contact the battery terminal, the
battery may cause damage or hurt bodies. If the battery terminal short circuit it will generate a lot
of heat. Take care when carrying and using the battery. Remember to put the battery or radio into
insulated container. Do not put it into metal container.

How to Charge

1. Plug the AC adaptor into the AC outlet, and then plug
the cable of the AC adaptor into the DC jack located
on the back of the charger. The indicator lights
orange(1s) and then goes out---waits to charge.
2. Plug the battery or the radio into the charger. Make
sure the battery terminals are in contact with charging
terminals well. The indicator turns into twinkling red---
Pre-charging begins.
3. After pre-charging for about 5 minutes, the red
indicator will stop twinkling--- charging begins.
4. It takes approximately 2 hours to fully charge the
battery. When the lamp lights green, the charging is finished. Remove the battery or the radio unit
with battery from socket.
4
Professional
FM Transceiver

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents