How To Charge - AnyTone AT-518Plus Instruction Manual

BATTERY INFORMATION
▼ Do not recharge the battery pack if it is already fully charged. This may shorten the life of the
battery pack or damage the battery pack.
▼ Do not charge the battery or transceiver if it is damp. Dry it before charging to avoid danger.
WARNING:
When keys, ornamental chain or other electric metals contact with the battery terminal, the battery
may cause damage or hurt bodies. If the battery terminal short circuit it will generate a lot of heat.
Take care when carrying and using the battery. Remember to put the battery or radio into insulated
container.Do not put it into metal container.

How to Charge

1. Plug the charger into AC outlet . The indicator light shows in Green.
2. Plug the Li-ion battery or transceiver with Li-ion battery into the charger.
A: Make sure that the battery terminals are in contact with charging terminals well.
B: In the process of charging, the indicator turns to Red.
3. When the battery full charged,
the indicator turns to green.
NOTE: It takes approximately 5 hours to fully charge the
battery. The actual charging time depends on the capacity
battery. Don't over charging the battery as over charging
will shorten the battery lift and reduct its performance.
Charging Transceiver Charging Battery
4
Professional
FM Transceiver