Drilling Table; Prohibition, Warning And Mandatory Signs; Safety Check - Optimum OPTIDRILL B 17PRO Operating Manual

1.11

Drilling table

Seats for T-slots are attached to the drill-
ing table.
WARNING!
Risk of injury due to parts flying off at
high speed. Securely fix the workpiece
on the drilling table.
1.12

Prohibition, warning and mandatory signs

INFORMATION
All warning signs must be legible. Check them regularly.
1.13

Safety check

Check the drilling machine at least once per shift. Inform the person responsible immediately of
any damage, defect or change in operating function.
Check all safety devices

at the beginning of each shift (at continuous operation),

once a week (with the machine in operation),

after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the driling machine.

are legible (clean them, if necessary),

are complete.
INFORMATION
Use the following table for organizing the checks.
General check
Equipment
Protective cover
Signs,
Markings
Date:
Functional test
Equipment
EMERGENCY-STOP
Push button
Drill chuck protection
Date:
Safety
Version 2.0.2 2014-11-04
Seats for clamping
Check
Mounted and securely tightened
Installed and legible
Checked by (signature):
Check
After actuating an EMERGENCY STOP push button the drilling machine
must be switched off.
Once the emergency stop button is activated, the bench drilling machine
should be switched off. The drilling machine may not start if the drill
chuck protection is open.
Checked by (signature):
Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
blocks
Img.1-4: Drilling table
B17Pro | B23Pro | B26Pro | B33Pro
OK
OK
GB
Page 15