Safety - Optimum OPTIDRILL B 17PRO Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
1

Safety

Representation Conventions

gives additional advices

calls on you to act

enumerations
This part of the operating instructions

explains the meaning and use of the warning notices included in these operating instruc-
tions,

defines the intended use of the drilling machine,

points out the dangers that might arise for you or others if these instructions are not
observed,

informs you about how to avoid dangers.
In addition to these operation instructions, please observe

the applicable laws and regulations,

legal regulations for accident prevention,

the prohibition, warning and mandatory signs as well as the warning labels on the drilling
machine.
When installing, operating, maintaining and repairing the drilling machine it is necessary to
observe the European standards.
If European standards are not applied at the national legislation of the country of destination,
the specific applicable regulations of each country are to be observed.
If necessary, the required measures must be taken to comply with the specific regulations of
each country before the drilling machine is used for the first time.
Always keep this documentation close to the drilling machine.
INFORMATION
If you are unable to solve a problem using these operating instructions, please contact us for
advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt
email: info@optimum-maschinen.de
GB B17Pro | B23Pro | B26Pro | B33Pro
Page 6 Original operating instructions
Safety
Version 2.0.2 2014-11-04