Storage; Installation And Assembly; Requirements To The Installation Site - Optimum OPTIDRILL B 17PRO Operating Manual

3.3

Storage

ATTENTION!
In case of wrong and improper storage electrical and mechanical machine components
might get damaged and destroyed.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport case:

Fragile goods
(Goods require careful handling)

Protect against moisture and humid environment

"Environmental conditions temperature" on page 20

Prescribed position of the packing case
(Marking of the top surface - arrows pointing to the
top)

Maximum stacking height
Example:not stackable - do not stack a second
packing case on top of the first one.
Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for
more than three months or are stored under different environmental conditions than those given
here.
3.4

Installation and assembly

3.4.1 Requirements to the installation site

Organize the working area around the drilling machine according to the local safety regulations.
INFORMATION
In order to attain good functionality and a high processing accuracy as well as a long durability
of the machine the installation site should fulfil certain criteria.
Please observe the following points:

The device must only be installed and operated in a dry and well-ventilated place.

Avoid places nearby machines generating chips or dust.

The installation site must be free from vibrations also at a distance of presses, planing
machines, etc.

The substructure must be suitable for the drilling machine. Also make sure that the floor has
sufficient load bearing capacity and is level.

The substructure must be prepared in a way that possibly used coolant cannot penetrate
into the floor.
Assembly
Version 2.0.2 2014-11-04 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
B17Pro | B23Pro | B26Pro | B33Pro GB
Page 23