WARNING!
Dangerous voltage even if the main switch is switched off.
The areas marked by the pictogram might contain live parts, even if the main switch is
switched off.
1.12
Drilling table
Seats for T-slots are attached to the drilling table.
WARNING!
Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on
the drilling table.
1.13
Drill chuck protection
Adjust the protective equipment to the cor-
rect height before you start working.
To do so, detach the clamping screw,
adjust the required height and re-tighten
the clamping screw.
A switch is integrated in the fixture of the
spindle protection which monitors that the
cover is closed.
INFORMATION
You cannot start the machine if the drill
chuck protection is not closed.
1.14
Personal protective equipment
For certain work individual protection gear as protective equipment. This includes:
Safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel toe caps,
ear protection.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness.
Clean your personal protective equipment
after each use,
regularly once a week.
Safety
Version 1.1.4 - 2022-09-14
Img.1-1:
Drill chuck protection
DH24BV | DH28BV | DH34BV | DH40BV
Translation of original instruction
EN
75